Flow Battery Felt
Flow Battery Felt
Our company uses imported high-quality polyacrylonitrile fibers as raw materials. Through our independently developed continuous production line, the product has good thickness uniformity, high electrochemical performance, and stable corrosion resistance. It can effectively reduce the internal resistance of the battery stack, improve energy conversion efficiency, increase the current density of the flow battery, and improve the utilization rate of electrolyte. The product is mainly used as electrodes in various flow battery industries.
Technical Parameters
| Thickness | 2.5±0.2 | 3.0±0.2 | 4.0±0.3 | 4.5±0.3 |
|---|---|---|---|---|
| Voltage Efficiency / Test value: 825°C / Current density: 157 mA/cm² | 86.7±0.75% | 85.7±0.75% | 83.4±0.75% | 82.9±0.75% |
| Coulombic Efficiency / Test value: 825°C / Current density: 157 mA/cm² | 96–98% | 96–98% | 96–98% | 96–98% |
| Energy Conversion Efficiency / Test value: 825°C / Current density: 157 mA/cm² | 84.2±1% | 83.2±1% | 81.3±1% | 80.7±1% |
| Density (g/cm³) | 0.08–0.1 | 0.08–0.1 | 0.09–0.12 | 0.09–0.12 |
| Cycle Life 1500 cycles | Voltage efficiency attenuation <2±0.5% | Voltage efficiency attenuation <2±0.5% | Voltage efficiency attenuation <2±0.5% | Voltage efficiency attenuation <2±0.5% |
| Cycle Life 3000 cycles | Voltage efficiency attenuation <2.5±0.75% | Voltage efficiency attenuation <2.5±0.75% | Voltage efficiency attenuation <2.5±0.75% | Voltage efficiency attenuation <2.5±0.75% |
| Specific Surface Area | 1–4 m²/g | 1–4 m²/g | 1–4 m²/g | 1–4 m²/g |
Thickness and width can be customized as required.
